Room controls & sensors. Comfort comes from the wall.
Thermostats, touch room controllers and sensors by ekinex – in the same design as the switch series, with no stylistic break on the wall. From the simple single-room controller to the air-quality controller that adjusts the ventilation by itself.
A thermostat for every project.
The new CLIMA generation controls every type of system – radiators, fan coils, surface heating and cooling up to VRF/VRV – and is available in all design series (FF, 71, 20venti, Era) with identical technology. Bus-powered, with no auxiliary supply.
CLIMA Easy · EK-EM2-TP-E
The simplified interface for residential and hotel projects: LCD with adjustable backlight, four touch keys, integrated temperature and humidity sensor, two freely programmable inputs.
CLIMA Classic · EK-EM2-TP-F
The full feature set: fan-coil control plus setpoint and time programmes on top – for demanding single-room control in the same calm design.
CLIMA combination devices · 20venti · 2-gang
Thermostat plus an 8- or 10-key push button with backlit symbols and proximity sensor in a double frame – climate, lighting and scenes at a single control point.
Compact dimensions, big impact.
The Touch & Control room controllers bundle climate, lighting, shading, audio and scenes on a brilliant IPS touchscreen – barely larger than a light switch, with a proximity sensor and haptic feedback.
Touch & Control 4″ · EK-EI2-TP-4
Four independent climate zones, lighting and dimming, RGB/RGBW, blinds, audio and eight scene groups – on 86×102 mm and only 10.5 mm slim, in black or white.
Touch & Control 5″ · EK-EI2-TP-5
The new flagship, mountable vertically or horizontally: eight climate zones, colour-temperature control, air-quality monitoring (PM2.5, CO2, VOC) and energy display.
The sensory organs of the building.
Presence detectors with KNX Secure and multisensors for temperature, humidity and air quality – discreetly integrated into ceiling and wall, so the house knows what to do.
Presence detector PIR · EK-SG2-TP-M
Multifunctional ceiling motion detector with KNX Secure: 360° detection up to 15.5 m in diameter, constant-light control, integrated temperature and humidity measurement – in white or black.
Presence detector "true presence" · EK-SG2-TP-P
Microwave technology detects even the smallest movements – seated people stay detected, the light stays on. Otherwise identically equipped to the PIR detector.
Multisensor T · rF · CO2 · ET2
The quiet measuring probe on the wall: temperature, relative humidity and CO2 equivalent on the KNX bus – also as a combination with an 8- or 10-key push button in a double frame.
Air-quality controller · ES2 / ES3
It doesn't just measure, it controls: thermostat function plus threshold control for humidity, TVOC and CO2 – up to direct actuation of Belimo VAV dampers and 6-way valves.
In the control cabinet: the complete KNX programme.
Behind every beautiful wall works a tidy distribution board. ekinex supplies the full DIN-rail range – here is the complete catalogue of the current generation, which we plan and dimension for your project:
Power supplies · 4 products
KNX bus power supplies and auxiliary power units for the control cabinet.
- Bus power supply 640 mA · EK-AH1-TP — 30 Vdc, 640 mA, for up to 64 KNX devices
- Bus power supply 1280 mA · EK-AM1-TP — 30 Vdc, 1280 mA, with bus-voltage monitoring
- Switch-mode power supply 12 Vdc / 2 A · EK-PSUD12 — input 100–240 Vac, output 12 Vdc 2 A
- Switch-mode power supply 24 Vdc / 1 A · EK-PSUD24 — input 100–240 Vac, output 24 Vdc 1 A
System devices · 6 products
Couplers, interfaces and system devices for topology and commissioning – the new generation with KNX Data Security.
- Line/area coupler Secure · EK-ID1-SEC-TP — 1 module, KNX Data Security, long frames, security proxy, extended filter table, bus-powered
- IP interface Secure · EK-IE1-SEC-TP — 1 module, up to 8 KNXnet/IP tunneling connections, KNX Secure, bus-powered
- IP router Secure · EK-IF1-SEC-TP — 1 module, line/area coupling over IP, up to 8 tunneling connections, KNX Secure
- USB-C/KNX interface · EK-IG1-TP — data interface between PC (USB-C) and the KNX bus
- Digital time switch · EK-TM1-TP — hourly/weekly/monthly/yearly programmes, astronomical function
- GPS module · EK-GPS-1 — provides date, time and coordinates via satellite (for the time switch)
Dimming actuators · 9 products
230 V phase-cut dimmers and 12–48 Vdc LED dimmers (PWM) – available as KNX and DALI versions, up to tunable white and RGBW.
- KNX dimmer 230 V, 1 channel · EK-GD2-TP-1-HV — leading/trailing edge, 90–230 Vac
- KNX dimmer 230 V, 4 channels · EK-GD1-TP-4-HV — 4 modules, up to 230 W per channel, channels independent or in parallel, manual operation; also available with common neutral (EK-GD1-TP-4-HV-N)
- KNX LED dimmer, 2 channels · EK-GD2-TP-2-LV — 12/24/48 Vdc PWM, tunable white
- KNX LED dimmer, 4 channels · EK-GD1-TP-4-LV-T — 12/24/48 Vdc PWM, tunable white / RGBW
- DALI dimmer 230 V, 1 channel · EK-GD2-DL-1-HV — up to 220 W
- DALI dimmer 230 V, 4 channels · EK-GD1-DL-4-HV — up to 200 W per channel
- DALI LED dimmer, 1/2/4 channels · EK-GD2-DL-1-LV / -2-LV / EK-GD1-DL-4-LV — PWM 12–48 Vdc; 2-channel with colour temperature, 4-channel with RGBW
- 0–10 V dimmer, 4 channels · AEKGF1TP — 0–10 V control signal
Gateways · 11 products
Protocol converters between KNX and third-party systems – from DALI via Modbus and BACnet to DMX and Control4.
- KNX/DALI gateway, 1 or 2 channels · EK-BF1-TP-D1 / -D2 — per channel 16 DALI groups or 64 ballasts, colour control (DT8), individual-lamp fault detection, manual operation
- Modbus RS485 master gateway · EK-BH1-TP-485 — 4 modules, Modbus RTU up to 115200 baud, up to 250 addresses, galvanically isolated RS485
- Modbus TCP/IP master gateway · EK-BH1-TP-TCP — 4 modules, Modbus master over Ethernet, up to 250 addresses
- BACnet IP server gateway · EK-BJ1-TP-IP — 4 modules, BACnet server over Ethernet
- BACnet MS/TP server gateway · EK-BJ1-TP-MSTP — 4 modules, BACnet over RS485, isolated ports
- M-Bus master gateway · EK-BM1-TP-20…160 — 4 modules, versions for 20/40/80/160 M-Bus meters
- PROFINET gateway · EK-BN1-TP — 4 modules, PROFINET slave, galvanically isolated ports
- DMX gateway · EK-BK1-TP — 4 modules, DMX master for up to 512 addresses
- RS485-Ethernet gateway PoE · EK-BU1-485-TCP — 2 modules, Modbus RS485 ↔ IP, PoE, −40 to +85 °C
- Sentio audio gateway · EK-BS1-TP-01 — 4 modules, integrates Sentio multiroom audio into KNX
- C4 Toolbox · EK-BT1-TP — advanced IP-KNX interface for Control4 systems
Switching & shutter actuators (ÆVO series) · 6 variants
The new generation of universal actuators: bistable 16 A relays, fully bus-powered (no auxiliary supply), manual operation with status LEDs directly on the device.
- Universal actuator ÆVO, 4 / 8 / 16 outputs · EK-FH1-TP / EK-FG1-TP / EK-FI1-TP — 16 A / 230 Vac bistable; pairs of outputs combinable for motor drives – up to 2/4/8 shutters or valves; 4 or 8 modules
- Universal I/O module ÆVO, 4+4 / 8+8 / 16+16 · EK-FH1-TP-I / EK-FG1-TP-I / EK-FI1-TP-I — like the universal actuator, plus configurable inputs for potential-free contacts or NTC sensors, integrated thermostat/hygrostat function
HVAC actuators · 7 products
Fan-coil controllers, heating actuators and VRF interfaces for every type of HVAC system.
- VRF interfaces with KNX · EK-AI6-TP-… — bidirectional for Daikin, LG, Mitsubishi Electric, Panasonic, Samsung and Toshiba: mode, fan speed, setpoint, diagnostics, consumption; 3 digital inputs, bus-powered
- Fan-coil controller, 3 speeds · AEKHA1TP — 3 discrete fan speeds, 2-pipe systems
- Fan-coil controller 0–10 V · AEKHB1TP — continuously variable fan control (brushless), 2-pipe
- Fan-coil controller, 3 speeds + 0–10 V · AEKHC1TP — 2- or 4-pipe systems
- Heating actuator, 8 channels · AEKHE1TP — for electrothermal valve drives / zone valves
- Mixing-group controller · AEKHH1TP — 3-point actuator-motor control
- NTC temperature sensors · REAEKST… — outdoor, immersion, contact and air sensors as accessories
Energy metering · 6 products
KNX energy meters and submeters – from MID-compliant meters to load control with logic functions.
- KNX submeter, three-phase, direct measurement · EK-MS1-TP-20D — 4 modules, up to 20 A direct; bidirectional active/reactive energy, OLED display, load control, logic functions
- KNX submeter, three-phase, for current transformers · EK-MS1-TP-TA — measurement via external transformers
- KNX submeter, single-phase · EK-MS2-TP-TA — transformers 5–120 A, up to 2 independent measuring circuits, also available as a flush-mounted version
- Current transformers · EK-MST-…A — accessories for the submeters
- MID meter, three-phase, 75 A · EK-ME1-75D — direct connection, MID-compliant (billing-grade)
- MID meter, three-phase, 5 A · EK-ME1-5TA-TP — measurement via current transformers, MID-compliant
Flush-mounted I/O & logic modules · 5 products
Compact interfaces for the flush-mounted wall box – also mountable on the DIN rail with an accessory.
- Logic module LM2 · EK-LM2-TP — logic functions and calculations on KNX objects
- Universal interface 2+2 · EK-CC2-TP — 2 inputs (potential-free) / 2 LED outputs
- Universal interface 4+4 · EK-CD2-TP — 4 inputs / 4 LED outputs
- Universal interface with thermostat · EK-CG2-TP — 4 inputs (DI or NTC) / 4 LED outputs, room thermostat for 4 zones
- Universal interface with relays · EK-CE2-TP — 4 inputs / 2 relay outputs 5 A, NTC input with thermostat function
Konnect4 (Control4 integration) · 1 system
The modular gateway integrates ekinex KNX devices natively into Control4 – programmed entirely in Composer Pro, without ETS, with automatic device discovery (SDDP).
- Konnect4 gateway · EK-BR1-TP-01 — 2 modules, 12/24 Vdc, Ethernet; compatible with the push-buttons of the FF, 20venti, 71 and Signum series
See. Touch. Decide.
In our showroom in Vienna you experience the ekinex world on a live KNX installation – consulting and sampling included.